Men’s React Floater Jacket

Clear
Not Available
Add to wishlist

Fit: True to Size

  •  Tall Sizes are available in Black/Charcoal only (Torso and Sleeve lengths are 2″ longer than the regular sizes)
  • Durable Polyester/Nylon outer shell fabrics.
  • Outer shell incorporates CASTLE X TOPWATER FLOAT ASSIST (TFA) Technology (150g body/100g sleeve) (Not U.S. Coast Guard Approved PFD)
  • Removable liner allows for warmth adjustment
  • Liner utilizes 3M Thinsulate insulation (100g body/100g sleeve)
  • Overall combined insulation weight (250g body/200g sleeve)
  • 5,000mm/5,000g/m2 Ven-Tex® 1.0 windproof, waterproof, breathable coated shell materials and DWR coating
  • CASTLE X TOPWATER FLOAT ASSIST (TPA) Technology (Not U.S. Coast Guard Approved PFD)
  • Critical Seams sealed and Comfort-Flow polyester mesh lining
  • Double-stitched seams, fleece lined hand pockets, cuffs and collar
  • Backpack friendly Ventec® zippered ventilation in biceps and core body utilize snow blocker mesh
  • Shock cord adjustable, insulated, fleece lined collar
  • Wind blocking magnetic/snap front placket
  • Velcro adjustable cuffs and Lycra hand gaiters
  • Zippered internal storage pockets plus Spandex storage pockets
  • 3M Scotchlite Reflective materials
  • Adjustable insulated removable hood
  • Internal powder skirt
  • Dropback design
  • Shock cord adjustable hem
  • Tether D-Ring
  • 3 Year Warranty

Men's Winter Jackets

 width=  width=  width=  width=  width=  width=  width=  width=  width=  width=  width=  width=  width=  width=
Jacket Code CX1 Flex Fuze Monosuit Phase Pivot Platform Podium Pit Coat Polar Race Jacket React Strike Thrust West Shore
Warmth Very Warm Medium Medium Low Medium Medium Medium Warm Very Warm Low Very Warm Medium Medium Very Warm
Temp Rating 8 / 5 8 5 / 1 1 8 5 / 1 8 8 9 1 9 / 5 8 5 / 1 10
Shell Insulation 100g body & 80g sleeves 200g body & 150g sleeve None None 200g body & 150g sleeve None 200g body & 150g sleeve 200g body & 200g sleeve 250g body & 200g sleeve None 150g body & 100 sleeve 200g body & 150g sleeve None 100g + 120g Castle X Topwater Float Assist
Removable Liner Insulation 100g body & 80g sleeves No Removable Liner 150g body & 120g sleeves No Removable Liner No Removable Liner 150g body & 120g sleeve No Removable Liner No Removable Liner No Removable Liner No Removable Liner 100g body & 100g sleeve No Removable Liner 150g body & 120g sleeve No Removable Liner
Warranty 1 Year 1 Year 3 Year 3 Year 1 Year 3 Year 1 Year 1 Year 3 Year 1 Year 1 Year 1 Year 3 Year 3 Year
Riding Type Crossover Trail Crossover Backcountry Trail Crossover Trail Race/Pit Coat Trail Race Crossover Trail Crossover Ice Fishing
Size Guide How To Measure

This sizing chart is simply a starting point. Body shapes vary – For the best fit, clothing should be fitted to you by an authorized Castle X dealer.

How To Measure:
For the most accurate sizing, have someone else take your measurements making sure the measuring tape is snug but not tight against your body.
Measure over light/minimal clothing.

Our sizing charts should be used as a general guide for determining your size. Variations in body shape as well as cut and style of the product should be considered when choosing a size.

These are only guidelines, visit your local dealer for assistance in selecting a proper fit.

  • Chest:
    Measure around the fullest part of chest/bust. Place measuring tape under the arms and make sure the tape is flat across the back.
  • Arm Length:
    Measure from the center of the back of the base of the neck, along shoulder and down the arm to the wrist, with a slightly bent elbow.
  • Bottom Hem:
    Measurement around the bottom opening of the jacket.

Silhouette of a person with measurement guides labeled for arm length, chest/bust, and bottom hem.

MEN'S REACT JACKET

SIZECHEST (1 inch below Armpit)BOTTOM HEMARM LENGTHARM LENGTH:TALL SIZING
SMALL49.5046.0033.38N/A
MEDIUM52.0048.5034.13N/A
LARGE54.5051.0034.6336.63
X-LARGE57.5054.0035.2537.25
2X-LARGE60.5057.0035.8837.88
3X-LARGE63.5060.0036.5038.50
4X-LARGE66.5063.0037.13N/A

Note: Please note: All measurements are in inches. Measurement tolerance = 1/2 inch